Once you have got dentures, you may often need repair as they get damaged with time. A damaged or fractured denture may result in several complications, including physical and mental distress. Before undergoing this dentistry practice in Mankato process, it is important to understand the denture repair process. This article is a step-by-step guide to denture repair. So, here we go! 

Steps to repair dentures 

1. Realign your broken denture 

The first step in fixing the broken dentures is realigning them. If dentures are broken or fractured in half, a paste is applied, which allows dentures to stay in place for a longer time. This adhesive is applied generously on both labial and lingual surfaces. 

2. Denture support and retention 

Once the broken denture is successfully aligned, the dentist holds it in a particular position for repair. The method used for keeping dentures in place is based on factors like the type of adhesive used and the type of damage. Generally, dentists use the tongue blade procedure.  

3. Impression cast creation 

Another important step in denture repair is creating the impression cast. Once the denture is fixed properly, a generous layer of plaster is applied to the fracture. The remaining plaster is spread out on a firm surface (wooden or glass) and the denture is pressed into it for a better impression cast. The wooden splints are taken out of the occlusal surfaces when the plaster has set, which takes 10 to 20 minutes.

4. Denture impression cast setup 

A lab knife is used to delicately extract the dentures from the previously set plaster. This is a critical step that must be repeated if the slab cast fractures. A model trimmer is used to trim the cast if it is successfully removed. A lab knife is used to make additional trimmings so that the dentures fit snugly. After that, the residue on the dentures is removed using an acrylic bur until 1-2 millimeters remain between each one.

5. Cast preparation and denture fixation 

Over the denture impression cast’s surfaces, liquid foil replacement is applied. The foil liquid hides the pore holes. After that, the dentures are washed to remove any remaining residue.

After drying, the dentures are reinstalled on the impression mold. There is some liquid monomer applied around the fracture’s borders. The liquid is then carefully covered with a powdered polymer, and this procedure is continued until the layers thicken and create a strong bond.

Wrapping Up 

Denture repair is quite a popular treatment. By following these steps, you can easily repair a broken or fractured denture.